Pickup 4WD L4-2366cc 24L SOHC Turbo (22R-TE) (1986) - Shift Solenoid, A/T - Component Locations
Shift Solenoid: Testing and Inspection
INSPECT SOLENOID
(a) Disconnect the connector from the ECT computer.
(b) Measure the resistance between S1, S2, SL, S4 and ground.
STD: 11 - 15 ohms
(c) Apply battery voltage to the solenoid.
Check that an operation noise can be heard from the solenoid.
NOTE: If there is foreign material in the solenoid valve, there will be no fluid control even with solenoid operation.