Previa Van 2WD L4-148.8 2438cc 2.4L DOHC (2TZ-FE) (1992)
/Page-930002.png)
6. LOOSEN THE TWO NUTS ON LOWER SIDE OF SHOCK ABSORBER
HINT:
-
Do not remove the bolts.
7. LOOSEN THE TWO BOLTS ON LOWER BALL JOINT
HINT:
-
Do not remove the bolts.
8. DISCONNECT TIE ROD END FROM STEERING KNUCKLE
a. Remove the cotter pin and nut.
b. Using SST disconnect the tie rod end from the steering kuckle. SST 09628-10011
9. REMOVE STEERING KNUCKLE
a. Remove the two bolts on lower ball joint.
b. Remove the two nuts and two bolts on lower side of shock absorber.
c. Remove the steering knuckle.
NOTICE(4WD):