Previa Van DX 4WD L4-2438cc 2.4L DOHC SC MFI (1997)
Drive/Propeller Shaft: Service and Repair
Overhaul
Front Propeller Shaft
FRONT PROPELLER SHAFT DISASSEMBLY
1. Separate propeller shaft and intermediate shaft.
a. Place matchmarks on the flanges.
b. Remove the 4 bolts and nuts.
2. Remove center support bearing from intermediate shaft.
a. Using a chisel and hammer, loosen the staked part of the nut.
b. Using Special Service Tool (SST) 09330 - 00021 or equivalent, to hold the flange, remove the nut.
c. Place matchmarks on the flange and shaft.
d. Using SST 09950 - 30010, remove the flange from the intermediate shaft.
e. Remove the center support bearing from the intermediate shaft.
FRONT PROPELLER SHAFT ASSEMBLY