Prius L4-1.8L (2ZR-FXE) Hybrid (2010)
_hybrid/Page-1002001.png)
Accelerator Pedal Position Sensor: Testing and Inspection
HYBRID / BATTERY CONTROL: ACCELERATOR PEDAL SENSOR: ON-VEHICLE INSPECTION
1. INSPECT ACCELERATOR PEDAL ASSEMBLY
(a) Connect the Techstream to the DLC3.
(b) Turn the power switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Powertrain / Hybrid Control / Data List / Accel Pedal Pos #1, Accel Pedal Pos #2.
(e) Read the Data List.
Result:
(f) If the result is not as specified, check the accelerator pedal assembly, wire harness or ECM.
