RAV4 2-Door 4WD L4-2.0L (3S-FE) (1997)
SST 09608 - 32010, 09950 - 70010 (09951 - 07150)
b. Using snap ring pliers, install a new snap ring.
2. Install dust cover. Install the dust cover with the 4 bolts.
Torque: 8.3 Nm (74 inch lbs.)
3. Install new outer oil seal.
a. Using SST and a hammer, install a new outer oil seal.
SST 09608 - 32010, 09950 - 70010 (09951 - 07150)
b. Apply Multipurpose (MP) grease to the oil seal lip.
4. Install front axle hub.
Using SST and a press, install the axle hub.
SST 09527 - 17011, 09950 - 60010 (09951 - 00370, 09950 - 70010 (09951 - 07150)
5. Install new inner oil seal.
a. Using SST and a hammer, install a new inner oil seal. SST 09608 - 32010, 09950 - 70010 (09951 - 07150)
b. Apply MP grease to the oil seal lip.