toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Front Steering Knuckle|Removal and Installation|Page 5641 > < Front Steering Knuckle|Removal and Installation|Page 5639
Page 4
background image

6. Install dust deflector.

Using SST and a hammer, install a new dust deflector.

SST 09316 - 20011, 09608 - 32010, 09950 - 70010 (09951 - 07150)

HINT:  Align the holes for the ABS speed sensor in the dust deflector and steering knuckle.

7. Install lower ball joint.

a. Install the lower ball joint and torque the nut.

Torque: 127 Nm (94 ft. lbs.)

b. Install a new cotter pin.

Front Steering Knuckle|Removal and Installation|Page 5641 > < Front Steering Knuckle|Removal and Installation|Page 5639