Testing: Entry Lock & Unlock Switch (Back Door) - Antenna, Keyless Entry
/Page-2061001.png)
Antenna - Keyless Entry: Testing and Inspection
Entry Lock And Unlock Switch (for Back Door)
DOOR LOCK: ENTRY LOCK AND UNLOCK SWITCH (for Back Door): INSPECTION
INSPECTION
1. INSPECT BACK DOOR OUTSIDE HANDLE
(a) Disconnect the connector.
(b) Remove the outside handle.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
If the result is not as specified, replace the back door outside handle.
