RAV4 2WD L4-2.5L (2AR-FE) (2009)
/Page-2062001.png)
Antenna - Keyless Entry: Testing and Inspection
Entry Lock and Unlock Switch (for Front)
DOOR LOCK: ENTRY LOCK AND UNLOCK SWITCH (for Front): INSPECTION
INSPECTION
HINT:
-
Use the same procedure for the RH and LH sides.
-
The procedures listed below are for the LH side.
1. INSPECT ENTRY LOCK AND UNLOCK SWITCH
(a) Disconnect the connector.
(b) Remove the outside handle.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
-
If the result is not as specified, replace the front door outside handle.
