RAV4 2WD L4-2.5L (2AR-FE) (2009)
5. INSTALL FRONT DOOR MARK RH
HINT: Use the procedure described for the LH side.
6. INSTALL NO. 1 BACK DOOR NAME PLATE (w/o Tire Carrier)
(a) Clean the back door outside garnish surface.
(1) Using a heat light, heat the back door outside garnish surface.
(2) Remove the double-sided tape from the back door outside garnish.
(3) Wipe off any tape adhesive residue with cleaner.
(b) Install a new name plate.
(1) Using a heat light, heat the back door outside garnish and a new name plate.
(2) Remove the peeling paper from the face of the name plate.
HINT: After removing the peeling paper, keep the exposed adhesive free from foreign matter.
(3) Align the boss positions and install the name plate.
HINT: Press the name plate firmly to install it.
7. INSTALL NO. 3 BACK DOOR NAME PLATE (w/o Tire Carrier)
(a) Clean the vehicle body surface.
(1) Using a heat light, heat the vehicle body surface.
(2) Remove the double-sided tape from the vehicle body.
(3) Wipe off any tape adhesive residue with cleaner.
(b) Install a new name plate.
(1) Using a heat light, heat the vehicle body and a new name plate.
(2) Remove the peeling paper from the face of the name plate.
HINT: After removing the peeling paper, keep the exposed adhesive free from foreign matter.
(3) Install the name plate in the position shown in the illustration.
HINT: Press the name plate firmly to install it.