RAV4 2WD L4-2.5L (2AR-FE) (2009)
(b) Check that there is no clearance between the camshaft timing exhaust gear and camshaft flange.
(c) Using a wrench to hold the hexagonal portion of the No. 2 camshaft, install the bolt.
Torque: 85 Nm (867 kgf-cm, 63 ft-lbf)
NOTICE:
-
Be careful not to damage the cylinder head or spark plug tube with the wrench.
-
Do not disassemble the camshaft timing exhaust gear.
12. ADD ENGINE OIL
(a) Add 50 cc (3.1 cu. in) of engine oil into the oil hole shown in the illustration.
NOTICE:
-
Oil must be added if the lash adjusters were removed.
-
Make sure that the low pressure chamber and oil paths of the lash adjusters are full of engine oil.
13. SET NO. 1 CYLINDER TO TDC / COMPRESSION