RAV4 2WD L4-2.5L (2AR-FE) (2009)
11. Install the chain tensioner.
A. Install the chain tensioner to the service hole.
Torque: 10 N*m (102 kg~cm, 7 ft*lbf)
B. When installing the tensioner pull out the pin
and release the tensioner.
C. Install the timing chain cover plate.
Install a new gasket and the timing chain cover plate with the 4 bolts.
Torque: 10 N*m (102 kgf*cm, 7 ft*lbf)
12. Install the cylinder head cover sub-assembly.
A. Apply a light coat of engine oil to 3 new gaskets.
B. Install the 3 gaskets to the camshaft bearing caps.
C. Install a new gasket to the cylinder head cover.
NOTICE
Remove any oil from the contact surface.
D. Apply FIPG sealant as shown in Figure 20. FIPG Sealant: Three Bond 1281, or equivalent Standard Seal Diameter: 3.0 to 6.0 mm (0.118 to
0.236 in.)
Application Width A: 5.0 mm (0.197 in.)
NOTICE