RAV4 2WD L4-2.5L (2AR-FE) (2009)
^
Remove any oil from the contact surface.
^
Install the cylinder head cover within 3 minutes and tighten the bolts within 15 minutes after applying FIPG sealant.
E. Align the cylinder head cover with pin A. Then align the cylinder head cover with pin B and install the cylinder head cover.
F. Install the 16 bolts and then tighten the bolts in the order shown in Figure 21.
Torque: 12 N*m (122 kgf*cm, 9 ft*lbf)
NOTICE
Do NOT apply oil for at least 4 hours after the installation.
13. Confirm the repair.