RAV4 2WD L4-2.5L (2AR-FE) (2009)
(c) Install a new gasket by hand so that its surface is flush with the exhaust manifold converter.
NOTICE:
-
Make sure the gasket is facing the correct direction.
-
Do not reuse the removed gasket.
-
Do not push in the gasket while installing the front exhaust pipe.
(d) Install a new gasket to the front exhaust pipe.
(e) Install the front exhaust pipe with the 2 compression springs and 4 bolts.
Torque: 43 Nm (438 kgf-cm, 32 ft-lbf)for bolt A
Torque: 43 Nm (438 kgf-cm, 32 ft-lbf)for bolt B
(f) Connect the heated oxygen sensor connector.
12. INSTALL GENERATOR ASSEMBLY
(a) Install the generator assembly See: Starting and Charging/Charging System/Alternator/Service and Repair/Installation.
13. INSPECT FOR EXHAUST GAS LEAK See: Exhaust Pipe/Service and Repair/Installation