Sequoia 4WD V8-4.6L (1UR-FE) (2010)
26. REMOVE FRONT DOOR PANEL PROTECTOR
(a) Disengage the 8 clips and remove the front door panel protector.
27. REMOVE FRONT DOOR OUTSIDE HANDLE COVER
(a) Remove the hole plug.
(b) Using "TORX" socket wrench T30, loosen the screw and remove the front door outside handle cover.
28. REMOVE DOOR LOCK CYLINDER (for Driver Side)
(a) Disengage the 2 claws and remove the door lock cylinder.
29. REMOVE FRONT DOOR LOCK See: Locks/Power Locks/Power Door Lock Actuator/Service and Repair/Front Door Lock/Removal
30. REMOVE FRONT DOOR OUTSIDE HANDLE ASSEMBLY