Sequoia 4WD V8-4.6L (1UR-FE) (2010)
(a) Remove the front door handle assembly by sliding and pulling it in the direction indicated by the arrow mark in the illustration.
31. REMOVE FRONT DOOR OUTSIDE HANDLE REAR PAD
(a) Disengage the 2 claws and remove the front door outside handle rear pad.
32. REMOVE FRONT DOOR OUTSIDE HANDLE FRONT PAD
(a) Disengage the 3 claws and remove the front door outside handle front pad.
33. REMOVE FRONT DOOR OUTSIDE HANDLE FRAME SUB-ASSEMBLY
(a) Using "TORX" socket wrench T30, loosen the screw.
(b) Disengage the claw and slide the front door outside handle frame sub-assembly to remove it.
34. REMOVE CUSHION
(a) Remove the cushions from the door panel.