Sequoia 4WD V8-4.6L (1UR-FE) (2010)
19. INSTALL FRONT DOOR NO. 1 TRIM BRACKET
(a) Install the front door No. 1 trim bracket with the 2 screws.
20. INSTALL OUTER MIRROR CONTROL ECU ASSEMBLY (for Driver Side with Memory)
(a) Install the outer mirror control ECU assembly with the 2 screws.
(b) Connect the connector.
21. INSTALL FRONT DOOR GLASS OUTER WEATHERSTRIP ASSEMBLY
22. INSTALL OUTER REAR VIEW MIRROR ASSEMBLY See: Mirrors/Service and Repair/Outer Rear View Mirror/Installation
23. INSTALL FRONT NO. 1 SPEAKER ASSEMBLY See: Accessories and Optional Equipment/Radio, Stereo, and Compact Disc/Speaker/Service
and Repair/Front Door Speaker/Installation
24. INSTALL SIDE AIR BAG SENSOR ASSEMBLY See: Restraint Systems/Air Bag Systems/Impact Sensor/Service and Repair/Side Airbag
Sensor/Installation
25. INSTALL FRONT DOOR GLASS INNER WEATHERSTRIP
(a) Install the front door glass inner weatherstrip on the front door trim board sub-assembly and fold down the 8 claws, as shown in the illustration.
26. INSTALL FRONT DOOR INSIDE HANDLE SUB-ASSEMBLY