Sequoia 4WD V8-4.6L (1UR-FE) (2010)
(a) Install the front door inside handle sub-assembly with the 3 screws.
27. INSTALL FRONT DOOR INSIDE HANDLE BEZEL
(a) Install the front door inside handle bezel with the 4 screws.
28. INSTALL SEAT MEMORY SWITCH (for Driver Side with Memory) See: Mirrors/Memory Positioning Systems/Seat Memory Switch/Service
and Repair/Installation
29. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY
(a) Connect the connectors.
(b) Connect the front door lock remote control cable and the front door inside locking cable.
(c) Engage the 10 clips and install the front door trim board sub-assembly.
(d) Tighten the 2 screws.