Sequoia 4WD V8-4.6L (1UR-FE) (2010)
HINT
Use the same procedure for both sides.
(a) Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and remove the cover.
(b) Remove the bolt and rope hook.
31. REMOVE REAR FLOOR MAT SUPPORT PLATE
(a) Disengage the 5 clips and 4 claws, and remove the rear floor mat support plate.
32. REMOVE QUARTER TRIM PANEL ASSEMBLY RH
(a) Disengage the 3 claws and remove the outer lap belt anchor cover.