Sequoia 4WD V8-4.6L (1UR-FE) (2010)
/Page-2813009.png)
(b) Remove the bolt and outer lap belt anchor.
(c) Remove the bolt and outer lap belt anchor.
(d) Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and remove the cover.
(e) Remove the 2 bolts and 2 clips.
(f) Disengage the 11 clips.
(g) Disconnect the connector and remove the quarter trim panel.
33. REMOVE QUARTER TRIM PANEL ASSEMBLY LH