Sequoia 4WD V8-4.6L (1UR-FE) (2010)
(d) Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and remove the cover.
(e) Remove the 2 bolts and 2 clips.
(f) Disengage the 2 clamps and remove the wire harness.
(g) Disengage the 11 clips and 2 clamps.
(h) Disconnect the 3 connectors and remove the quarter trim panel.
Part 2
INTERIOR PANELS / TRIM: ROOF HEADLINING: REMOVAL
36. REMOVE REAR WINDOW SIDE GARNISH ASSEMBLY RH
(a) Using a screwdriver with its tip wrapped in protective tape, disengage the claw and remove the cover.