Sequoia 4WD V8-4.6L (1UR-FE) (2010)
(b) Remove the bolt.
(c) Detach the 5 clips.
(d) Pass the rear seat outer belt floor anchor through the rear window side garnish, and remove the rear window side garnish.
37. REMOVE REAR WINDOW SIDE GARNISH ASSEMBLY LH
HINT
Use the same procedure for both sides.
38. REMOVE REAR WINDOW NO. 2 SIDE GARNISH ASSEMBLY RH
(a) Using a screwdriver with its tip wrapped in protective tape, disengage the claw and remove the cover.
(b) Remove the bolt.
(c) Disengage the 5 clips.
(d) Pass the rear seat outer belt floor anchor through the rear window No. 2 side garnish, and remove the rear window No. 2 side garnish.
39. REMOVE REAR WINDOW NO. 2 SIDE GARNISH ASSEMBLY LH (w/o Power Back Door)
HINT
Use the same procedure for both sides.
40. REMOVE REAR WINDOW NO. 2 SIDE GARNISH ASSEMBLY LH (w/ Power Back Door)