Sequoia 4WD V8-4.6L (1UR-FE) (2010)
/Page-2943001.png)
Seat Heater: Component Tests and General Diagnostics
Front Seat Cushion Heater
SEAT: FRONT SEAT CUSHION HEATER: INSPECTION
1. INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY LH
(a) Heat the thermostat with a light.
(b) Check the seat cushion heater.
(1) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
(2) If the result is not as specified, replace the seat cushion heater.
2. INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY RH
(a) Heat the thermostat with a light.
(b) Check the seat cushion heater.
(1) Measure the resistance according to the value(s) in the table below.
Standard Resistance: