Sequoia 4WD V8-4.6L (1UR-FE) (2010)
(2) If the result is not as specified, replace the seat cushion heater.
Front Seatback Heater
SEAT: FRONT SEATBACK HEATER: INSPECTION
1. INSPECT FRONT SEATBACK HEATER ASSEMBLY LH
(a) Check the seatback heater.
(1) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
(2) If the result is not as specified, replace the seatback heater.
2. INSPECT FRONT SEATBACK HEATER ASSEMBLY RH
(a) Check the seatback heater.
(1) Measure the resistance according to the value(s) in the table below.
Standard Resistance: