Sequoia 4WD V8-4.6L (1UR-FE) (2010)
HINT
The No. 2 parking brake cable bolt locations are symmetric to those of the No. 3 parking brake cable, with the exception of the
locations indicated with *A.
(a) Install the No. 2 parking brake cable to the rear axle carrier with the bolt.
Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)
(b) Install the No. 2 parking brake cable to the frame with the 8 bolts.
Torque : 19 Nm (194 kgf-cm, 14 ft-lbf)
(c) Connect the No. 2 parking brake cable to the intermediate lever.
14. INSTALL NO. 2 CABLE RETAINER
(a) Install the retainer with the bolt.
Torque : 13 Nm (128 kgf-cm, 9 ft-lbf)
15. INSTALL INTERMEDIATE LEVER TENSION SPRING
(a) Install the tension spring.
16. ADJUST PARKING BRAKE SHOE CLEARANCE See: Adjustments
17. CONNECT REAR DISC BRAKE CYLINDER ASSEMBLY LH See: Service and Repair/Reassembly