Sequoia 4WD V8-4.6L (1UR-FE) (2010)
/Page-2285001.png)
Blower Motor: Service and Repair
Front Blower Motor
Components
HEATING / AIR CONDITIONING: FRONT BLOWER MOTOR: COMPONENTS
Removal
HEATING / AIR CONDITIONING: FRONT BLOWER MOTOR: REMOVAL
1. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Removal
2. REMOVE BLOWER WITH FAN MOTOR SUB-ASSEMBLY
(a) Disconnect the connector and 2 clamps.
(b) Remove the 3 screws and the motor.
Installation
HEATING / AIR CONDITIONING: FRONT BLOWER MOTOR: INSTALLATION
1. INSTALL BLOWER WITH FAN MOTOR SUB-ASSEMBLY