Sequoia 4WD V8-4.6L (1UR-FE) (2010)
(a) Connect the No. 8 water by-pass hose.
HINT
The direction of the hose clamp is indicated in the illustration.
6. INSTALL NO. 3 WATER BY-PASS PIPE SUB-ASSEMBLY
(a) Install the No. 3 water by-pass pipe with the 2 bolts and connect the hose.
HINT
The direction of the hose clamp is indicated in the illustration.
Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)
(b) Connect the No. 4 water by-pass hose.
7. INSTALL INTAKE MANIFOLD ASSEMBLY
(a) Install the intake manifold See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and Repair/Installation.