Sequoia 4WD V8-4.6L (1UR-FE) (2010)
HINT
Remove the fuel tank before removing the left upper control arm.
3. REMOVE FUEL TANK ASSEMBLY (for 1UR-FE)
See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Tank/Service and Repair/Removal
HINT
Remove the fuel tank before removing the left upper control arm.
4. REMOVE REAR WHEEL
5. REMOVE REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH See: Sensors and Switches - Suspension/Ride Height Sensor/Service
and Repair/Removal
6. SEPARATE REAR DISC BRAKE CYLINDER ASSEMBLY LH See: Brakes and Traction Control/Disc Brake System/Service and
Repair/Removal and Replacement/Rear Brake/Removal
7. SEPARATE REAR BRAKE FLEXIBLE HOSE
(a) Remove the 3 bolts and disconnect the rear brake flexible hose.
8. DISCONNECT REAR SPEED SENSOR WIRE
(a) Disconnect the rear speed sensor connector.
(b) Remove the 4 bolts and disconnect the rear speed sensor wire.
9. REMOVE REAR UPPER CONTROL ARM ASSEMBLY LH