Sequoia 4WD V8-4.6L (1UR-FE) (2010)
/Page-2119012.png)
(a) Remove the 3 bolts and 3 nuts and remove the rear upper control arm.
Installation
REAR SUSPENSION: REAR UPPER ARM: INSTALLATION
1. TEMPORARILY INSTALL REAR UPPER CONTROL ARM ASSEMBLY LH
(a) Temporarily install the rear upper control arm with the 3 bolts and 3 nuts.
2. CONNECT REAR SPEED SENSOR WIRE
(a) Connect the rear speed sensor wire with the 4 bolts.
Torque : 13 Nm (127 kgf-cm, 9 ft-lbf)
(b) Connect the speed sensor connector.
3. INSTALL REAR BRAKE FLEXIBLE HOSE