Sequoia 4WD V8-4.6L (1UR-FE) (2010)
![background image](/toyota/sequoia_4wd/v8-4.6l_(1ur-fe)/Page-2119013.png)
(a) Install the rear brake flexible hose with the 3 bolts.
*
for bolt A
Torque : 29 Nm (296 kgf-cm, 21 ft-lbf)
*
for bolt B
Torque : 13 Nm (127 kgf-cm, 9 ft-lbf)
4. INSTALL REAR DISC BRAKE CYLINDER ASSEMBLY LH See: Brakes and Traction Control/Disc Brake System/Service and
Repair/Removal and Replacement/Rear Brake/Installation
5. INSTALL REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH See: Sensors and Switches - Suspension/Ride Height Sensor/Service
and Repair/Installation
6. INSTALL REAR WHEEL See: Suspension Strut / Shock Absorber/Service and Repair/Removal and Replacement/Rear Shock
Absorber/Installation
7. STABILIZE SUSPENSION See: Suspension Strut / Shock Absorber/Service and Repair/Removal and Replacement/Rear Shock
Absorber/Installation
8. TIGHTEN REAR UPPER CONTROL ARM ASSEMBLY LH
(a) Tighten the 3 bolts and 3 nuts.
Torque : 185 Nm (1886 kgf-cm, 137 ft-lbf)
9. INSTALL FUEL TANK ASSEMBLY (for 3UR-FE)
See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Tank/Service and Repair/Installation
10. INSTALL FUEL TANK ASSEMBLY (for 3UR-FBE)
See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Tank/Service and Repair/Installation
11. INSTALL FUEL TANK ASSEMBLY (for 1UR-FE)
See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Tank/Service and Repair/Installation
12. INSPECT AND ADJUST REAR WHEEL ALIGNMENT
See: Alignment/Service and Repair
Components
REAR SUSPENSION: REAR LOWER ARM (for No. 1 Arm): COMPONENTS