Sequoia LTD 4WD V8-4.7L (2UZ-FE) (2001)
Brake Pad: Service and Repair
Rear
Rear
REPLACEMENT
1. REMOVE REAR WHEEL
2. INSPECT PAD LINING THICKNESS
Check the pad thickness through the caliper inspection hole and replace pads if not within the specification.
Minimum thickness: 1.0 mm (0.039 inch)
3. REMOVE BRAKE CALIPER
(a) Remove the 2 sliding pins.
(b) Remove the caliper and suspend it so the hose is not stretched.