Sequoia LTD 4WD V8-4.7L (2UZ-FE) (2001)
8. REMOVE AIR OUTLET SERVOMOTOR
a. Using a screwdriver, release the claw and remove the plate.
HINT: Tape the screwdriver tip before use.
b. Remove the 3 screws and servomotor.
9. SEPARATE REAR A/C UNIT
a. Remove the 2 screws clamp and blower case.
b. Remove the 10 screws and separate the A/C unit.
c. Remove the sliding door and shaft.
d. Remove the heater radiator and insulator.
REASSEMBLY
1. ASSEMBLE REAR A/C UNIT
a. Install the insulator and heater radiator.
b. Install the shaft and sliding door.
c. Assemble the A/C unit and install the 10 screws.
d. Install the blower case, clamp and 2 screws.