Sequoia LTD 4WD V8-4.7L (2UZ-FE) (2001)
/Page-1370005.png)
2. INSTALL AIR OUTLET SERVOMOTOR
a. Align the marking A on the grid part of the case with the side of the sliding door rack B.
b. Install the servomotor with 3 screws.
HINT: The projection on the gear (marking B) shall be positioned vertically.
3. INSTALL EVAPORATOR
4. INSTALL EXPANSION VALVE
5. INSTALL WATER VALVE
6. INSTALL THERMISTOR
7. INSTALL POWER TRANSISTOR
8. INSTALL BLOWER MOTOR
