Sequoia LTD 4WD V8-4.7L (2UZ-FE) (2001)
5. REMOVE FRONT SEAT CUSHION INNER SHIELD
Remove the 2 screws and front seat cushion inner shield.
6. REMOVE SEATBACK ASSEMBLY
a. Remove the 3 hog rings as shown in the illustration.
b. Remove the wire harness of side airbag assembly.
c. Remove the 4 bolts and seatback assembly.
INSTALLATION
NOTE: Never use airbag parts from another vehicle. When replacing parts, replace them with new parts.
1. INSTALL ARMREST
a. Install the armrest with the bolt.
Torque: 37 N.m (380 kg.cm, 27 ft.lb)
b. Close the fastener.
2. INSTALL SEATBACK ASSEMBLY