Sequoia LTD 4WD V8-4.7L (2UZ-FE) (2001)
/Page-1456009.png)
a. Remove the screw.
b. Remove the seat cushion lower shield as shown in the illustration.
c. Employ the same manner described above to the other side.
11. REMOVE POWER SEAT SWITCH
a. Unlatch the front portion of seat cushion cover hook.
b. Turn over the left part of seat cushion cover.
c. Remove the 3 screws.
d. Disconnect the 2 connectors and remove the power seat switch.
12. REMOVE SEAT CUSHION ASSEMBLY
a. Disconnect the connector.
b. Remove the 4 bolts and seat cushion assembly.
13. REMOVE SEATBACK ASSEMBLY
a. Remove the 3 hog rings as shown in the illustration.
b. Remove the 4 bolts and seatback assembly.
NOTE: Do not apply unnatural force to the airbag wire harness.
