Sequoia LTD 4WD V8-4.7L (2UZ-FE) (2001)
Vehicle involved in collision and airbag is deployed:
INSPECT SUPPLEMENTAL RESTRAINT SYSTEM
a. Do a diagnostic system check.
b. Do a visual check which includes the following items with the front passenger airbag assembly removed from the vehicle.
-
Check the deformation or cracks on the instrument panel and instrument panel reinforcement.
-
Check the damage on the connector and wire harness.
HINT: If the instrument panel or instrument panel reinforcement is deformed or cracked, never repair it. Always replace it with a new one.
CAUTION: Be sure to follow the correct procedure, for removal and installation of the front passenger airbag assembly.
REPLACEMENT REQUIREMENTS
In the cases shown in the image, replace the front passenger airbag assembly, instrument panel or instrument panel reinforcement.
CAUTION: Be sure to follow the correct procedure, for replacement of the front passenger airbag assembly.
SIDE AIRBAG ASSEMBLY
MANUAL SEAT
Vehicles not involved in collision:
INSPECT SUPPLEMENTAL RESTRAINT SYSTEM
a. Do a diagnostic system check.
b. Do a visual check which includes the following item with the seatback assembly installed in the vehicle. Check that there are no cuts or frayed in
seams and outside of seatback cover.
Vehicle involved in a collision and airbag is not deployed:
INSPECT SUPPLEMENTAL RESTRAINT SYSTEM
a. Do a diagnostic system check.