Sequoia LTD 4WD V8-4.7L (2UZ-FE) (2001)
b. Do a visual check which includes the following items with the seatback assembly removed from the vehicle.
-
Check cuts, tears and cracks of the side airbag assembly.
-
Check cuts and cracks in wire harness, and chipping in connectors.
CAUTION: Be sure to follow the correct procedure for removal and installation of the seatback assembly.
Vehicle involved in a collision and airbag is deployed:
INSPECT SUPPLEMENTAL RESTRAINT SYSTEM
a. Do a diagnostic system check.
b. Do a visual check which includes the following items with the seatback assembly removed from the vehicle.
-
Check the seatback installation part of the seat adjuster.
-
Check the damage to the connector and wire harness.
HINT: If the seat adjuster is deformed, never repair it. Always replace it with new one.
REPLACEMENT REQUIREMENTS
In the cases shown in the image, replace the seatback assembly or seatback cover.
CAUTION: Be sure to follow the correct procedure, for removal and installation of the seatback assembly.
POWER SEAT
Vehicles not involved in collision: