Sequoia LTD 4WD V8-4.7L (2UZ-FE) (2001)
Starter Motor: Service and Repair
Disassembly and Reassembly
DISASSEMBLY
1. REMOVE FIELD FRAME AND ARMATURE
a. Remove the nut, and disconnect the lead wire from the magnetic switch terminal.
Torque: 5.9 N.m (60 kgf.cm, 52 in..lbf)
b. Remove the 2 through bolts.
Torque: 9.3 N.m (95 kgf.cm, 82 in..lbf)
c. Pull out the field frame together with the armature from the magnetic switch assembly.
NOTE: At the time of assembly, please refer to the following items.
Align the protrusion of the field frame with the groove of the magnetic switch.
d. Remove the O-ring from the field frame.
HINT: At the time of assembly, please refer to the following items.
Use a new O-ring.
2. REMOVE STARTER HOUSING, CLUTCH ASSEMBLY AND GEAR
a. Remove the 2 screws.
Torque: 9.3 N.m (95 kgf.cm, 82 in..lbf)