Sequoia LTD 4WD V8-4.7L (2UZ-FE) (2001)
16. REMOVE OIL SEAL
Using SST, press out the oil seal.
SST 09950-60010 (09951-00360), 09950-70010 (09951-07360)
INSPECTION
INSPECT STEERING RACK
a. Using a dial indicator, check the rack for runout, teeth wear and damage.
Maximum runout: 0.03 mm (0.0118 inch)
b. Check the back surface for wear and damage.
REPLACEMENT
NOTICE: When using a vise, do not overtighten it.
1. IF NECESSARY, REPLACE OIL SEAL AND BEARING
a. Using Special Service Tool (SST), press out the oil seal and bearing from the control valve housing.
SST 09950-60010 (09951-00250), 09950-70010 (09951-07150)
b. Coat a new oil seal lip with power steering fluid.
c. Using SST, press in the oil seal.
SST 09950-60010 (09951-00180, 09951-00320, 09952-06010), 09950-70010 (09951-07150)