Sequoia LTD 4WD V8-4.7L (2UZ-FE) (2001)
/Page-1293001.png)
Ball Joint: Service and Repair
Lower
REMOVAL
1. REMOVE FRONT WHEEL
2. LOOSEN 4 LOWER BALL JOINT SET BOLTS
HINT: Do not remove the bolts.
3. DISCONNECT TIE ROD END
a. Remove the cotter pin and nut from the tie rod end.
b. Using Special Service Tool (SST), disconnect the tie rod end from the lower ball joint.
SST 09610-20012
