Sequoia LTD 4WD V8-4.7L (2UZ-FE) (2001)
4. Install the other SST to the set SST to hold the companion flange, and remove the nut.
SST 09330-00021
5. Remove the 3 nuts, SST and stud bolts from the companion flange.
b. 4WD:
1. Using a chisel and hammer, loosen the staked part of the nut.
2. Using SST to hold the flange, remove the nut.
SST 09330-00021
c. Using SST, remove the companion flange.
SST 09950-30011 (09951-03010, 09953-03010, 09954-03010, 09955-03030, 09956-03050)
4. REMOVE OIL SEAL
Using SST, remove the oil seal.
SST 09308-10010
5. REMOVE FRONT BEARING