Sequoia LTD 4WD V8-4.7L (2UZ-FE) (2001)
2. Set the SST and install the 3 nuts to the companion flange.
SST 09213-58013
3. Install the other SST to the set SST to hold the companion flange and torque the nut.
SST 09330-00021
Torque: 147 Nm (1,500 kgf-cm, 109 ft. lbs.)
4. Remove the 3 nuts, SST and stud bolts from the companion flange.
d. 4WD: Using SST to hold the flange, torque the nut.
SST 09330-00021
Torque: 147 Nm (1,500 kgf-cm, 109 ft. lbs.)
11. ADJUST DRIVE PINION PRELOAD
12. STAKE DRIVE PINION NUT
13. CONNECT REAR PROPELLER SHAFT