Sequoia LTD 4WD V8-4.7L (2UZ-FE) (2001)
/Page-1026003.png)
a. Inspect the spider bearing for wear or damage.
b. Using a dial indicator, check the spider bearing axial play by turning the yoke of flange while holding the shaft tightly.
Maximum bearing axial play: 0.05 mm (0.0020 inch)
If the spider bearing axial play exceeds the maximum, replace the spider bearing.
INSTALLATION
1. INSTALL DUST COVER
2. INSTALL FRONT PROPELLER SHAFT
a. Align the matchmarks on the propeller shaft flanges and differential, and connect the flanges with the 4 bolts, washers and nuts.
b. Torque the 4 bolts.
Torque: 74 Nm (750 kgf-cm, 54 ft. lbs.)
c. Align the matchmarks on the propeller shaft flanges and transfer, and connect the flanges with the 4 washers and nuts.
d. Torque the 4 nuts.
Torque: 74 Nm (750 kgf-cm, 54 ft. lbs.)
3. INSTALL REAR PROPELLER SHAFT
a. Align the matchmarks on the propeller shaft flanges and differential, and connect the flanges with the 4 bolts, washers and nuts.
b. Torque the 4 bolts.
Torque: 74 Nm (750 kgf-cm, 54 ft. lbs.)
c. Align the matchmarks on the propeller shaft flanges and transfer, and connect the flanges with the 4 washers and nuts.
d. Torque the 4 nuts.
Torque: 74 Nm (750 kgf-cm, 54 ft. lbs.)
