Sequoia LTD 4WD V8-4.7L (2UZ-FE) (2001)
/Page-1012006.png)
Using a snap ring expander, install a new snap ring.
5. INSTALL SPEED SENSOR ROTOR AND BEARING RETAINER (DIFFERENTIAL SIDE)
Using SST and a press, install a new speed sensor rotor and bearing retainer.
SST 09631-12090, 09950-60020 (09951-01030)
Standard length: 132.8 ±1.0 mm (5.228 ±0.039 in.)
INSTALLATION
Installation is in the reverse order of removal.
HINT: After installation, fill the brake reservoir with brake fluid, bleed brake system, check for leaks and check the speed sensor signal.
