Sequoia LTD 4WD V8-4.7L (2UZ-FE) (2001)
b. Remove the 2 package holder net hooks.
c. Remove the rear No.1 seat outer belt floor anchor.
d. Remove the 3 bolts, clip and quarter trim panel, then disconnect the connector.
11. w/ Rear No.2 seat: REMOVE REAR NO.2 SEAT OUTER BELT SHOULDER ANCHOR
12. REMOVE NO.2 REAR WINDOW SIDE GARNISH
Remove the 2 clips and No.2 rear window side garnish.
13. REMOVE REAR NO.1 SEAT OUTER BELT SHOULDER ANCHOR
a. Using a screwdriver, remove the anchor cap.
HINT: Tape the screwdriver tip before use.
b. Remove the rear No.1 seat outer belt shoulder anchor.
14. REMOVE REAR WINDOW SIDE GARNISH