Sequoia LTD 4WD V8-4.7L (2UZ-FE) (2001)
Remove the rear window side garnish.
15. REMOVE QUARTER WINDOW GLASS
a. w/ Glass antenna:
Disconnect the connectors from the glass antenna terminals.
b. Push a piano wire through from the interior.
c. Tie both wire ends to wooden blocks or similar objects.
HINT: Apply protective tape to the outer surface to keep the surface from being scratched.
NOTE: When separating the glass, take care not to damage the paint and interior.
d. Cut the adhesive by pulling the piano wire around it.
HINT: Cut the adhesive areas as shown in the illustration, leaving the adhesive where the clips are.
e. Push the piano wire through as shown in the illustration, cut off the adhered part to the clips.
f.
Remove the glass.
NOTE: Leave as much of the adhesive on the body as possible when cutting off the glass.
INSTALLATION