Sequoia LTD 4WD V8-4.7L (2UZ-FE) (2001)
5. REMOVE REAR TRIM COVER
Using a screwdriver, remove the rear trim cover.
HINT: Tape the screwdriver tip before use.
6. REMOVE REAR TRIM
Using a screwdriver, remove the rear trim.
HINT: Tape the screwdriver tip before use.
7. REMOVE REAR FLOOR MAT SUPPORT PLATE
8. w/o Rear No. 2 seat:
REMOVE QUARTER TRIM HOLE COVER
Using a screwdriver, remove the quarter trim hole cover.
HINT: Tape the screwdriver tip before use.