Sequoia LTD 4WD V8-4.7L (2UZ-FE) (2001)
9. w/ Rear No. 2 seat:
REMOVE QUARTER TRIM UPPER BELT HOLE COVER
Using a screwdriver, remove the quarter trim upper belt hole cover.
HINT: Tape the screwdriver tip before use.
10. REMOVE QUARTER TRIM PANEL
a. w/o Tonneau cover:
Using a screwdriver, remove the 2 No. 1 tonneau cover holder caps.
HINT: Tape the screwdriver tip before use.
b. Remove the 2 package holder net hooks.
c. Remove the rear No. 1 seat outer belt floor anchor.
d. Remove the 3 bolts, clip and quarter trim panel, then disconnect the connector.
11. w/ Rear No. 2 seat:
REMOVE REAR NO. 2 SEAT OUTER BELT SHOULDER ANCHOR