Sequoia LTD 4WD V8-4.7L (2UZ-FE) (2001)
2. CLEAN CONTACT SURFACE OF NEW GLASS
Using a cleaner, clean the contact surface around the entire glass rim.
NOTE: Do not touch the glass face after cleaning it.
3. INSTALL NEW DAMS
Install new dams with adhesive tape as shown in the illustration.
A: 5.1 mm (0.201 in.)
B: 7.2 mm (0.283 in.)
4. COAT CONTACT SURFACE OF BODY WITH PRIMER "M"
Using a brush, coat Primer M to the exposed part of body on the vehicle side.
NOTE:
-
Let the primer coating dry for 3 minutes or more.
-
Do not coat Primer M to the adhesive.
-
Do not keep any of the opened Primer M for later use.