Sequoia LTD 4WD V8-4.7L (2UZ-FE) (2001)
Windshield: Removal and Replacement
REMOVAL
1. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIPS
2. REMOVE FRONT PILLAR GARNISH
a. Remove the assist grip.
1. Using a screwdriver, remove the 2 assist grip plugs.
HINT: Tape the screwdriver tip before use.
2. Remove the 2 screws and assist grip.
b. Remove the front pillar garnish.
c. Employ the same manner described above to the other side.
3. REMOVE SUN VISORS AND HOLDERS
4. w/ Sliding roof:
REMOVE ROOF CONSOLE BOX
a. Remove the 2 screws.
b. Using a screwdriver, remove the roof console box.
HINT: Tape the screwdriver tip before use.
c. Disconnect the connector.
5. w/o Sliding roof:
REMOVE ROOF CONSOLE BOX