Sequoia LTD 4WD V8-4.7L (2UZ-FE) (2001)
a. Remove the 4 screws.
b. Using a screwdriver, remove the roof console box.
HINT: Tape the screwdriver tip before use.
c. Disconnect the connectors.
6. REMOVE INNER REAR VIEW MIRROR
Remove the inner rear view mirror as shown in the illustration.
7. REMOVE WIPER ARMS
a. Using a screwdriver, remove the 2 caps.
HINT: Tape the screwdriver tip before use.
b. Remove the 2 nuts and wiper arms.
8. REMOVE COWL TOP VENTILATOR LOUVER
a. Remove the hood to cowl top seal.
b. Using a clip remover, remove the 6 clips.
c. Remove the 8 screws and cowl top ventilator louver.
9. REMOVE ROOF SIDE RAIL WEATHERSTRIP
Using SST, pull off the roof side rail weatherstrip from front end.
SST 09806-30010
10. REMOVE WINDSHIELD OUTSIDE MOULDINGS
Remove the 8 screws and windshield outside mouldings.